FAQs
LATICRETE® 111 cement based Crete filler powder which is mixed with LATICRETE® 4237 Latex Admix liquid to form highly flexible thin set adhesive and used for tile / stone installation in internal and external areas.
LATICRETE® 111 cement based Crete filler powder which is mixed with LATICRETE® 73 Latex Admix liquid to form flexible thin set adhesive and used for tile / stone installation in internal and external areas.
You can use cement based grout (LATICRETE® 500 series sanded grout / LATICRETE® 600 series un-sanded grout) mixed with LATICRETE® 1776 grout admix plus for filling these spaces. You can also use STELLAR™ Grout or SP-100™ DUO.
No. It is mandatory to have spacing between the tiles when installed on external façade or floors. The thermal movements are very high and spacers are must to accommodate such movements.
No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212® for such installations.
The maximum height is 250 ft when you want to install tiles using LATICRETE® 111+ LATICRETE® 73. For installation of tiles more than 250 ft height, please seek advice from MYK LATICRETE team member.
Yes, you can install natural stones with LATICRETE® 111+LATICRETE® 73. However, we recommend using LATICRETE® 320 & LATICRETE® 340 basis the area of application.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE® 111+ LATICRETE® 73 has the ability to accommodate such
movements.
The maximum size of tile is 1200mm X 1200mm for installation with LATICRETE® 111 + LATICRETE® 73. If you are installing tiles larger than this size, we recommend using LATICRETE® 111 + LATICRETE® 4237 or LATICRETE® 345 Super Flex.
For installation of metal tiles on any substrate, we recommend using PUA 212® - The Versatile Adhesive.
