FAQs

My design of external wall does not provide for spacing between tiles. Can I proceed using LATICRETE^® 325 High Flex?

No. It is mandatory to have spacing between the tiles when installed on external façade. The thermal movements are very high and spacers are must to accommodate such movements.

Can I install Engineered stones / Agglomerates / Quartz using LATICRETE^® 325 High Flex Ag Silver?

No, do not use cement based adhesives for installation of engineered stones, agglomerates & Quartz. We recommend using PUA 212^® for such installations.

If I want to use LATICRETE^® 325 High Flex for internal / external wall tiling, what is the maximum height up to which I can install tiles?

The maximum height is 50 ft when you want to install tiles using LATICRETE^® 325 High Flex. For installation of tiles more than 50 ft height, we recommend using LATICRETE^® 345 Super Flex.

Can I install Natural stones using LATICRETE^® 325 High Flex?

Yes, you can install natural stones with LATICRETE^® 325 High Flex. However, we recommend using LATICRETE^® 320 & LATICRETE^® 340 basis the area of application.

Can I use LATICRETE^® 325 High Flex for external tile installations?

Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. LATICRETE^® 325 High Flex has the ability to accommodate such movements.

What is the maximum size of tile that can be installed using LATICRETE^® 325 High Flex?

The maximum size of ceramic / vitrified tile for interior application is 1200mm X 1200mm and for exterior application is 600mm X 600mm. If you are installing tiles larger than this size, we recommned using LATICRETE^® 335 Super Flex and higher.

How much water is to be mixed with LATICRETE^® 325 High Flex?

For 20 Kg bag of LATICRETE^® 325 High Flex, one needs 5 to 6 Litres of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.

Where can I use this adhesive? Someone told me that LATICRETE^® 325 High Flex is only for small glass mosaic tiles.

You can use LATICRETE^® 325 High Flex for internal and external areas like residential floors & walls to install clay/ ceramic/ vitrified/ glass mosaic tiles.

What is LATICRETE^® 325 High Flex Ag Silver?

LATICRETE^® 325 High Flex is high polymers and cement based thin set adhesive which is mixed with water and used for tile installation in internal and external areas.

Can I install Natural stones using LATICRETE^® 307?

Yes, we can install small format natural stones using our LATICRETE^® 307. However, we recommend using LATICRETE^® 320 & LATICRETE^® 340 basis the area of application

Quick Answers To Common Queries

Can't find what you're looking for?

About Us

Products

Estimators & Visualizers

Contact Us