LATAPOXY® 2000
It is a high-performance, industrial-grade epoxy grout designed for highly corrosive environments.
LATAPOXY® 2000
It is a high-performance, industrial-grade epoxy grout designed for highly corrosive environments.
Colour:
Black & Grey
SKU:
Compliance:
ANSI: A 118.3
EN 13888: RG2
Product Overview
LATAPOXY® 2000 is an industrial epoxy grout that offers exceptional chemical resistance, high temperature tolerance and rapid curing. It is ideal for use in harsh industrial environments, providing durable and reliable performance.
Features & Benefits
1
Joint-Width
Can be applied for joint-width of 2 mm to 12 mm
2
Anti-Bacterial & Anti-Fungal
Protects against microbial growth, ensuring a hygienic environment
3
High Temperature Resistance & Steam Cleanable
Withstands extreme temperatures and can be cleaned with steam
4
Water Cleanable when Fresh
Easy to clean during the initial application stage
5
High Resistance to most Acids, Corrosives & Solvents
Ideal for use in chemically aggressive environments
6
Fast-Curing
Ready for foot traffic in 12 to 14 hours, minimizing downtime
Product Details
Specifications
EN 13888: RG2
Substrates
Vitrified Tile
Granite
Marble
Metal Tile
Grout Coverage Calculator
*Please select a product.
Unit size
0 kg
Coverage per unit
0 sq.ft.
*Please select a product.
*Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.
*Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.
*Reduce 10% to 15% of above coverage for waste, spillage and clean-up with Ceramic Tile & Vitrified tiles.
FAQs
- Clean the surface of the tiles and joints free of dust and debris with wet cloth or sponge. Remove spacers from the joints.
- Find out if the tiles were washed with acid based cleaners. If washed with acid based cleaners, wash the tiles again with plenty of clean water to remove any acidic remains in the joints.
- Don’t allow water to stand in the grout joints prior to grouting. Allow the joints to become dry.
- Check if all the tools and sufficient grout material is available for completion of job without any disturbance.
- Cordon off the area and don’t allow any traffic after cleaning the joints.
- 1. Don’t do part mixing. The grout components are pre-packed and need to be used completely. For small areas mix liquid components (Part A and Part B) first and then add filler powder to the already mixed liquid. There are two sets of Part A, 2 sets of Part B and 2 sets of Part C in the pack of LATAPOXY®2000.
- Do not mix the grout in dirty pails, buckets. Always use clean pail to get the best results.
- Use gloves while mixing and applying the epoxy grout. A pair of gloves is provided in the grout pack.
- Don’t use putty blades for application of grout: Putty blades are metallic blades which will leave scratches on the tile surface. ALWAYS USE RUBBER FLOATS so that the tile doesn’t get scratched.
- Don’t allow any other works like plumbing, electrical fittings, plastering, tiling or painting to be done in the grouting area while applying the epoxy grout. If there is dust in the air, it settles down on the grouted joint which will be difficult to remove. Don’t allow any traffic other than people who are working with epoxy grout.
- Start initial cleaning with the scrubber provided in the kit in about 45 minutes time from the time of filling up of joints. If not done, it is difficult to remove the grout haze and excess grout after couple of hours. Final cleaning must be carried out after 24 hours from the time of first cleaning.
- Do not smoke while working with the epoxy grout. Do not allow any fire producing elements to the site while working with epoxy grout.
- Always use potable quality clean water for first and final cleaning of the grout joints.
