SP-100™ Tile joint
A high-performance, stain resistant, germ & water resistant epoxy grout for durable and easy-to-clean tile joints.
SP-100™ Tile joint
A high-performance, stain resistant, germ & water resistant epoxy grout for durable and easy-to-clean tile joints.
Colour:
Available in a range of more than 40 colours
SKU:
Compliance:
ANSI: A 118.3
EN 13888: RG2
Food Grade certification by CFTRI
Product Overview
SP-100™ Tile joint is a superior epoxy tile grout designed for use in both interior and covered exterior tile installations, offering long-lasting durability and resistance to stains and chemicals.
Features & Benefits
1
Joint-Width
Can be applied for joint-width of 2 mm to 12 mm
2
Stain-Resistant
Keeps grout looking clean and new, free from stains
3
Germ-Resistant
Prevents bacterial and fungal growth for a hygienic surface
4
Water-Resistant
Ideal for wet environments, maintaining performance in moisture-prone areas
5
Colour-Fast
Retains its original colour without fading over time
6
Food Grade
Can be used for domestic, commercial, institutional kitchens and dining spaces
7
Easy to Clean
Simple maintenance ensures long-lasting beauty
8
Chemical & Temperature Resistant
Withstands harsh temperature conditions and various chemicals
9
Non-cracking or Powdering
Provides a solid, durable grout joint for years
Product Details
Specifications
EN 13888: RG2
Food Grade certification by CFTRI
Watch Your Design Come to Life with Our Grout Visualizer
Use our Tile Grout Visualizer to see how different grout shades will look with your tiles, helping you make the perfect choice.
Grout Coverage Calculator
*Please select a product.
Unit size
0 kg
Coverage per unit
0 sq.ft.
*Please select a product.
*Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.
*Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.
*Reduce 10% to 15% of above coverage for waste, spillage and clean-up with Ceramic Tile & Vitrified tiles.
FAQs
- Clean the surface of the tiles and joints free of dust and debris with wet cloth or sponge. Remove spacers from the joints.
- Find out if the tiles were washed with acid based cleaners. If washed with acid based cleaners, wash the tiles again with plenty of clean water to remove any acidic remains in the joints.
- Don’t allow water to stand in the grout joints prior to grouting. Allow the joints to become dry.
- Check if all the tools and sufficient grout material is available for completion of job without any disturbance.
- Cordon off the area and don’t allow any traffic after cleaning the joints
- Don’t do part mixing. The grout components are pre-packed and need to be used completely. For small areas, use small packs. Mix liquid components (Part A and Part B) first and then add filler powder to the already mixed liquid.
- Do not mix the grout in dirty pails, buckets. Always use clean pail to get the best results.
- Use gloves while mixing and applying the epoxy grout. A pair of gloves is provided in the grout pack.
- Don’t use putty blades for application of grout: Putty blades are metallic blades which will leave scratches on the tile surface. ALWAYS USE RUBBER FLOATS so that the tile doesn’t get scratched.
- Don’t allow any other works like plumbing, electrical fittings, plastering, tiling or painting to be done in the grouting area while applying the epoxy grout. If there is dust in the air, it settles down on the grouted joint which will be difficult to remove. Don’t allow any traffic other than people who are working with epoxy grout.
- Start initial cleaning with the scrubber provided in the kit in about 45 minutes time from the time of filling up of joints. If not done, it is difficult to remove the grout haze and excess grout after couple of hours. Final cleaning must be carried out after 24 hours from the time of first cleaning.
- Do not smoke while working with the epoxy grout. Do not allow any fire producing elements to the site while working with epoxy grout.
- Always use potable quality clean water for first and final cleaning of the grout joints.
Yes. When you want to fill tile joints of water bodies and pools with SP-100™, you can do so by leaving one joint at every 12 ft distance in both directions. These joints can be subsequently filled using a silicone sealant. For further details, seek advice from MYK LATICRETE team member.
